From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
S3 logo, of pre-VIA times

The S3 Virtual Reality Graphics Engine (ViRGE) graphics chipset was one of the first 2D/3D accelerators designed for the mass market.

Introduced in 1995 by then graphics powerhouse S3, Inc., the ViRGE was S3's first foray into 3D-graphics. The S3/Virge was the successor to the successful Trio64V+. ViRGE/325 was pin compatible with the Trio64 chip, retaining the DRAM-framebuffer interface (up to 4MB), and clocking both the core and memory up to 80 MHz. In Windows, Virge was benchmarked as the fastest DRAM-based accelerator of the era. The VRAM-based version, ViRGE/VX, was actually slower in lower resolutions, but had a faster RAMDAC to support high-resolution modes not available on the 325.[1]


Part of S3's marketing plan for the ViRGE included the "S3D" standard, stating that members of the ViRGE family carried the S3D Graphics Engine. Games that supported ViRGE directly put this logo on their box so owners of the 3D card would know that it would run as well as possible on their computer. And, despite its lackluster 3D-speed, the ViRGE did receive some S3D enhanced games, due in large part to the brand prestige S3 carried in this period: ViRGE-enhanced versions of Terminal Velocity, Descent II, Monster Truck Madness, Tomb Raider, MechWarrior 2 and Jedi Knight.


Diamond's Stealth3D 2000 with ViRGE/325

With the successful launch of the Sony PlayStation home game-console, pressure was on the PC market to incorporate hardware that could compete in the area of realtime 3D graphics rendering, something that software-based host-CPU rendering could not do on its own. That is, main-CPU software-based rendering could render realtime 3D graphics—as demonstrated by games like Descent, which used only the main CPU and standard VGA hardware to render full-screen 3D video with 6-degrees-of-freedom motion in real time—but the resolution, polygon count, and quality of shading, smoothing, etc. were not competitive with dedicated 3D rendering hardware. While the market demand was clearly present, realtime 3D graphics rendering was new and unfamiliar territory for S3 and many of its hardware competitors. With a sizable chunk of ViRGE's hardware real-estate already devoted to other key functions (such as the VGA-controller, 2D/BITBLT engine, RAMDAC, PCI and memory interface), and the need to serve traditional 2D applications, the resulting 3D functionality was both limited and slow.

When performing basic 3D-rendering with only texture mapping and no other advanced features, ViRGE's pixel throughput was somewhat faster than the best software-optimized (host-based CPU) 3D-rendering of the era, and with better (16bpp) color fidelity. But when additional rendering operations were added to the polygon load (such as perspective-correction, Z-depth fogging, and bilinear filtering), rendering throughput dropped to the speed of software-based rendering on an entry-level CPU. 3D-rendering on the high-end VRAM based ViRGE/VX (988) was even slower than the less expensive ViRGE/325, due to the VX's slower core and memory clock rates. The upgraded ViRGE/DX and ViRGE/GX models did improve 3D rendering performance,[1] but by the time of their introduction they were still unable to distinguish the ViRGE family in an already crowded 3D market.

Outside of 3D rendering, ViRGE was a solid performer in familiar tasks as DOS VGA and Microsoft Windows. Here, S3's substantial experience in high-performance Windows acceleration showed, with ViRGE benchmarking near the top among competing DRAM-based VGA cards. In OEM PC markets, ViRGE sold well as a direct replacement to S3's highly successful Trio/64 family. The ViRGE family delivered faster Windows acceleration in the same physical footprint as its predecessor.

The introduction of competing hardware, 3dfx's Voodoo Graphics and Rendition's Verité, and game titles such as Id Software's popular Quake engine, resulted in an industry-wide shakeout. S3, along with other previously well-established VGA vendors in the PC market, were unable to adapt to the rapidly evolving PC 3D graphics market, being relegated to sell into market segments where 3D graphics functionality was unimportant. Although the ViRGE sold well in the OEM market, poor Direct3D performance and lack of OpenGL support prevented the ViRGE from competing in the more lucrative 3D graphics segment.


Between its birth in 1995 and retirement near the year 2000, the ViRGE family received regular upgrades. The ViRGE/DX boosted the performance of the original ViRGE/325 by improving perspective correction and implementing a full-speed trilinear filter. The ViRGE/GX added support for more modern SD/SGRAM. The ViRGE/GX2 was one of the first VGA chipsets to support AGP, although the level of support extended little beyond electrical compliance. Substantial use of AGP's feature-set would have to wait until the Savage 3D.

The ViRGE was ultimately replaced by the Savage 3D in S3's top-end graphics segment in 1998, which lacks support for the S3D API. However, at least one derivative (Trio3D) of the ViRGE remained in production even after the discontinuation of the Savage 3D.



  1. ^ a b "PC Goes 3D". Next Generation. No. 26. Imagine Media. February 1997. p. 57.
  2. ^ S3 ViRGE 325 Register Documentation
  • Product Overview: S3 ViRGE Integrated 3D Graphics/Video Accelerator (PDF), S3 Incorporated, July 1996.
  • Product Overview: S3 ViRGE/VX Integrated 3D Graphics/Video Accelerator (PDF), S3 Incorporated, July 1996.

External links[edit]